Fall creeks loaded with shad, bass fired up on moving baits before the weekend blows in.
Water's sitting in that money-zone upper 60s where bass are chewing hard and staying shallow. They're stuffed in behind shad migration, especially back in the creeks where the banks are holding quality fish. Stained water and full cloud cover mean they'll stay aggressive all day, no midday shutdown. Pressure's steady and that helps too. Wind is light and south out of the 5-knot range, so no weather worry yet, just gray and comfortable. Bass are in feeding mode right now, so you move baits and cover ground instead of soaking one spot.
The day's game plan
Where to fish
- Creek mouths and secondary creek arms — 3 to 8 feet initially, 10 to 15 feet in the deeper creek channels · Fallen timber, rock shelves, hard banks, inside bends with current breaks.
Fall shad migration is the key. Bass follow shad into creeks and set up on banks and current breaks to ambush. This is where quality fish are feeding all day. - Main lake channel swings and inside bends — 8 to 15 feet · Hard bottom transitions, deep ledges, channel edges where structure meets open water.
Secondary staging area when bass aren't shallow. Inside bends concentrate baitfish and create current breaks. Transition zones funnel bass movement. - Docks and rock piles — 4 to 12 feet · Dock pilings, wooden structure, rock faces and revetment, anything hard and vertical.
Cover and shade, especially important midday. Bass use docks as ambush points and rest areas. Rock provides structure and deflection for crankbaits. - Deep main lake and river arm channels — 15 to 25 feet · Channel edge, hard bottom, gravel and sand transitions, deep ledges.
Night and low-light holding spots. Bass retreat to deeper structure to stage and sleep. Jigging spoons and vertical presentations are most effective here.
What to throw
- Whopper Plopper — 4 to 5 in · Natural shad or chartreuse · 5/8 oz (Early and late light, shallow creek banks, 3 to 8 feet, when bass are feeding up.)
Walk the dog with steady side-to-side twitches, pause occasionally, keep the head just under or breaking the surface. - Square-bill crankbait (DT-6 style) — 2.25 in · Merthiolate or shad · 1/2 oz (Morning to midday, creek banks and main lake rocks, 4 to 10 feet.)
Cast to banks, rocks, wood, and docks. Retrieve steady at 2 to 3 feet per second and let it deflect off structure. - Chatterbait — n/a · Black and chartreuse or all black · 3/8 oz (Afternoon and transition periods, 6 to 12 feet, rocks and timber on channel edges.)
Steady retrieve with slight twitch, keep it near or in contact with cover. Maintain a cadence that lets the blade thump. - Lipless crankbait — 2 in · Chartreuse or white · 1/2 oz (Midday and dusk, channel swings and creek mouths, 8 to 15 feet.)
Burn and pause, snap and glide, snap it down and let it flutter back up. Work it in the water column, not necessarily on bottom. - Jigging spoon — n/a · Silver, white, or junebug · 3/8 to 3/4 oz (vary by depth and wind) (Midday, dusk, and night, 8 to 25 feet, channel swings and deep ledges.)
Vertical or casting and lifting, snap it up 3 to 4 feet and let it flutter on semi-slack line. Work it tight to bottom or on the channel edge.
How to work it
- Moving baits up the banks — Early morning through midday, and again at dusk. Best when light is low or diffuse. · Creek banks, secondary creek arms, main lake rock faces, docks and laydowns.
Cast topwater or moving lures (Plopper, Chatterbait, square-bill) along the bank edge from 3 to 8 feet, parallel to the shoreline or at slight angles. Cover ground systematically and keep casting. - Deflection off structure — All day when bass are feeding, especially morning and late afternoon. · Anywhere there is wood, rock, or hard structure within 2 to 6 feet of the boat or cast point.
Cast a square-bill or crankbait so it impacts timber, rock, or dock pilings and deflects sharply. The impact and sudden direction change trigger strikes from bass holding tight to cover. - Vertical jigging on the channel — Midday when bass slide deeper, dusk, and night when they stack on the deep channel. · Main lake channel bends, deep creek channels, ledges, 15 to 25 feet.
Drop a jigging spoon straight down on the channel edge or ledge, snap it up sharply 3 to 4 feet, pause and let it flutter down on a semi-slack line. Repeat the cycle. Use a fish finder or forward-facing sonar to see the bottom depth and any bass below.
Pro tips
- Use forward-facing or down-imaging sonar if you have it, especially after midday when bass start transitioning deeper. You can watch them slide off the shallows and dial in the exact depth they stack at on the channel edge.
- Fall bass key on shad profile and size. Match your bait size to what you see in your livewell or on a shad spawn around the banks. If they're 2 inches, don't throw a 5-inch bait. If they're 4 inches, upsize to that.
- The stained water is your friend today. It keeps bass aggressive and shallow longer than clear water would. Lean into vibration and dark colors, and don't waste time on subtle, finesse presentations. Move and cover ground.
If conditions change
If a front rolls in hard over the next 48 hours, expect the bite to shut down as pressure rises. Downsize everything to 4-inch finesse worms and drop shots on the channel edge, fish slow, and target the thickest cover. If the water clears up after a rain, switch to natural shad colors and longer leaders, especially shallow. If wind kicks up and waves build, stay in the creeks where it's protected, and rely on vibration (Chatterbait, spinnerbait) and dark colors to cut through the chop. If the low front passes quickly and pressure steadies again within 12 to 24 hours, the bite rebounds hard as the front clears.
Find more fish. A fresh guide report like this for covered lakes every day · free account