Fall shad chase in the coves and creek channels, low water making wood stand out.
We're in the sweet spot of fall, water sitting in the low 70s and comfortable for bass, with a rising barometer after some weather passed through. The lake's running low, about 3.6 feet below normal pool, which concentrates bass and makes structure easier to find. Today is clear and cool with light northwest wind, a perfect day to cover water. Bass are moving out of deep summer spots and sliding into the creeks and cove backs following shad, so you're hunting them in transition zones, not locked onto one deep spot. The low water means the stumps, timber and clay banks near creek channels are more exposed and hold more fish.
The day's game plan
Where to fish
- Upper creek arms and cove backs — 3 to 6 feet · Submerged stumps, timber, clay banks near the creek channel.
Fall shad push into shallow cove backs and bass chase them hard, especially early and late light. Low water makes the stumps more pronounced. This is your primary hunting ground. - Creek channel ledges and inside bends — 6 to 12 feet · Hard ledges, timber along the channel edge, inside bends with current breaks.
Bass stage on these edges all day as transition routes between shallow feeding zones and deeper sanctuary. The ledges concentrate forage and provide easy access to deep water for escape. - Main-lake points and dam structure — 8 to 18 feet · Rocky areas, deeper timber, hard bottom ledges, main-lake channel bends.
When shallow and mid-depth water goes quiet, bass regroup on main-lake structure. The dam riprap and points provide rock cover and direct access to the deepest sanctuary water. - Shallow stump flats near cove mouths — 3 to 5 feet · Scattered timber, stumps, some emerging vegetation if present.
Transition zones where bass move between the open creek channel and the back flats, especially during early and late light. These flats hold active bass that haven't fully committed to deep daytime structure.
What to throw
- Lipless crankbait — 2.5 in · Chrome, silver, shad · 5/8 oz (Early morning and first light when bass are shallow and chasing shad in cove backs.)
Cast tight to timber and submerged stumps, retrieve steady to moderately fast with pauses, let it drop on pauses. - Crankbait, medium-diving — 2 to 2.5 in · Bone, chartreuse shad, natural shad · 3/8 to 1/2 oz (Morning and all-day channel structure work when bass hold tight to the ledge edges.)
Steady grind along channel edges and ledges, tick the timber and drop-offs on the way down, rip and pause on hits. - Soft-plastic swimbait — 3 to 4 in · Natural shad, ghost minnow, smoke · 1/4 to 3/8 oz (Midday and deeper structure when sunlight pushes bass down and natural profiles work better.)
Slow and steady pull with occasional subtle twitches, let it sink on pauses, watch the line. - Chatterbait — n/a · Black, junebug, dark colors with contrasting trailers · 3/8 to 1/2 oz (Late afternoon when bass reposition and you need to search deeper structure.)
Cast and retrieve steady and fast, covering water, pausing to flutter occasionally. - Topwater popper — 2 to 2.5 in · White, bone, natural shad · 1/4 oz (Dusk and the final 15 to 20 minutes of usable light.)
Cast to timber pockets and stump fields, work slow with one pop every two seconds, pause between pops.
How to work it
- Grind the ledge — Morning through late afternoon whenever bass are holding on structure between shallow flats and deep channels. · Creek channel edges dropping from 6 to 12 feet or deeper.
Work a crankbait or chatterbait along the drop-off edge of creek channels, keeping constant contact with bottom changes and timber. - Pick apart the timber — Early morning when bass are most aggressive, and again at dusk when they return to shallow hunting grounds. · Cove backs and shallow flats with submerged stumps and fallen timber in 2 to 6 feet.
Make precise casts to individual stumps and logs in shallow water, letting the bait settle near the wood and working it slow, pausing frequently. - Work the clay bank — All day as transition zones where shad stage and bass hunt the break between shallow banks and deep channels. · Clay banks adjacent to creek channels, especially where the bank drops into deeper water.
Follow red or tan clay banks near creek channels, casting parallel and letting baits like jerkbaits and swimbaits drop along the bank contour.
Pro tips
- Low water at 3.6 feet below pool makes structure more compact and easier to find. Stumps that were 8 feet down are now 5 feet down. Spend less time searching and more time picking apart the spots you find. The compressed water column means bass are stacked tighter on the wood.
- The rising barometer after the previous weather means bass are actively feeding and willing to chase. Throw bigger baits and move fast. This won't last forever, so take advantage of the aggressive window. By tomorrow the pressure will stabilize and fishing could slow.
- Water clarity splits the lake. The upper creek arms are darker and muddier from fresh rain, while the main lake and dam end stay clearer. If you start in muddy water, use dark or bright colors with more vibration (chatterbait, spinnerbait). If you're on the clearer end, natural shad profiles and medium-diving crankbaits will outfish reaction baits.
If conditions change
If the wind kicks up or clouds roll in, the shallow bite will last longer because light penetration drops. Extend your morning cove work into late morning and push your evening window earlier into late afternoon. If the water clears further after a rain stops, downsize your baits to 2-inch profiles and lengthen your leader. If the upper creeks stay heavily stained from runoff, stick with dark or high-contrast colors, bump up to 1/2 ounce baits to get depth faster, and slow your retrieves in the sludge. If you find a cove or creek arm that's producing well early, fish it again at dusk instead of hunting new water all day. The same bass return to the same feeding zones as light changes.
Find more fish. A fresh guide report like this for covered lakes every day · free account