Low-60s water and steady pressure mean bass are in the feed window, work the channel edges and main-lake points with shad profiles and jigs.
Fall is here and the water is hanging in the low 60s where bass are active and looking up. The lake is 95 feet below normal pool, so run with care because humps, points and shoals are very shallow now, some just under the surface, and confirm your launch ramp is open and has water on it before you drive. The sky will be gray all day with light wind out of the west, and pressure is steady, so there is no front pushing or retreating. That means the patterns are locked in and predictable. Shad are schooling and bass are hunting them on points and channel structure. Work your areas methodically and you will find them.
The day's game plan
Where to fish
- Main-lake points — 15 to 25 feet on the structure, 30 to 40 feet adjacent deep water · Hard-bottom transitions, usually clay or gravel, with channel depth nearby
Main-lake points funnel bass between deep winter holding areas and shallow feeding zones. In fall, bass stage here before moving into creeks. The deep-water escape route is essential. - Channel-swing edges — 20 to 30 feet at the bend, 15 to 25 feet on the inside break · Inside bends have softer bottom and slower current, outside bends have hard bottom and steeper drop-off
Channels are the highways bass use to migrate between structures. The bends concentrate baitfish and give bass a perfect hunting perch. Inside bends hold more fish, outside bends hold bigger fish. - Creek-arm secondary points — 12 to 20 feet, with 25 to 35 feet nearby · Usually rocky or hard-bottom transitions where smaller creeks meet the main creek channel
In fall when shad schools scatter into the arms, bass stage on these smaller points before pushing to spawn-flat shallows. They offer a natural filtering zone between open water and cover. - Upper creek timber and bends — 6 to 15 feet with hard bottom nearby · Fallen trees, stumps, dock pilings, any cover that breaks the light
As dusk drops and light fades, bass move shallow into creek arms to hunt forage in cover. The timber slows prey and bass ambush from the shadows.
What to throw
- Shad-pattern jerkbait — 4 in · Ghost shad or pearl · n/a (Early morning and low light when bass chase profiles up from breaks)
Sharp 12-inch pulls with 2-second pauses, let it glide on slack line - Shad-pattern swimbait — 5 in · Natural pearl, shad gray · 1/4 oz jighead (Early light and transition periods when bass are suspended or staged)
Slow roll tight to structure edges, work the entire water column - Drop shot with shad plastic — 4 in plastic · Pearl, ghost shad, or chartreuse · 3/8 oz weight, 12 to 18 inches above the hook (Morning bite when bass are holding tight to bottom structure)
Bounce the bottom in small motions, 2 to 3 second pauses between drags - Green pumpkin crawfish jig — 1/2 to 5/8 oz · Green pumpkin · 1/2 to 5/8 oz (Late afternoon when bass move back up the structure to feed)
Creep it along the bottom around timber and rock, pause 3 to 4 seconds between movements - Lipless crankbait — 2.5 to 3 in · Chartreuse-and-black or white, junebug if muddy · 3/4 oz (Evening and dusk when reaction strikes peak)
Cast and rip with 2-foot strips and hard pauses, steady cadence
How to work it
- Point structure workover — Early morning through late afternoon as the primary search pattern · Main-lake points and channel-swing edges in 15 to 35 feet
Follow the main-lake points with a sonar and fan-cast from shallow to deep, marking where the bottom drops hardest and bass cluster - Vertical blade spoon — Midday when bass pull to the deepest refuge and jerkbaits slow · Deepest channel bends and humps in 25 to 35 feet during midday
Drop the spoon to the depth where you are marking fish, flutter it up 15 to 20 feet and let it fall on slack line, repeat through the zone - Ripping through cover — Evening and dusk when low light amplifies the strike response · Creek arms and secondary channel bends in 8 to 15 feet
Cast to timber or rock and rip the lipless crankbait with hard 2-foot strips, pause hard between strips to trigger reaction strikes
Pro tips
- Run your points and channel edges early and confirm you are on hard bottom before committing to a full stretch. Mark every bite with a waypoint and work backward to the exact depth and structure piece that produced. Fall bass follow a tight depth band and once you find it, all similar structures at that depth will hold fish.
- In gray skies like today, bass will not push as deep at midday as they would under bright sun. The midday lull is shorter, so your window to work structure all day is longer than typical fall. Use blade spoons to cover the deeper zones quickly, then reset on the shallower edges sooner than usual.
- The low pool means every drop-off and transition will be exaggerated. Run the channel edge slowly and watch your sonar closely. Humps and ridges that run 15 feet in normal pool will show shallower now, so the zones where bass stage might be only 8 to 12 feet where they would normally be 15 to 20 feet.
If conditions change
If wind picks up out of the north or the sky clears and pressure rises, bass will pull deeper and tighter to the channel bends and deepest humps. Shift to drop shots and blade spoons and slow everything down. If rain rolls in and the water stains, switch to dark colors like junebug and black and use bigger vibrating baits like spinnerbaits with wider blades. If the pressure drops ahead of a front, all the patterns described here will fire earlier and harder, especially lipless cranks and spinnerbaits at dusk. Fish aggressive, cover water fast and expect reaction bites to stack up for 12 to 24 hours before the system moves through.
Find more fish. A fresh guide report like this for covered lakes every day · free account