Fall shad bite in the mid-depth ledges. Overcast keeps them looking and fired up.
We're in that October sweet spot when the water's comfortable in the mid-70s and the bass are chasing shad all over the lake. Pressure's been rising since yesterday but it's still holding steady, and that gray sky keeps them from dropping too deep. The pool's down a touch, which means the shallower flats and channel edges where the baitfish stack are even more critical. All day overcast with a light east breeze. Bass are aggressive in the morning and will keep biting into the afternoon as long as the clouds stay. This is fast-water fishing. Cover ground, work the structure confidently, and don't overthink it.
The day's game plan
Where to fish
- Twin Coves Timber — 14 to 20 feet · Submerged flooded timber stands with hard bottom and ledge transitions into deeper water
Historical fall holding zone. Shad relate to timber edges for cover and bass ambush there. Ledge break nearby provides an escape route to deep water. Productive all morning and still good into midday. - North Main-Lake Ledges — 12 to 24 feet depending on the section · Hard-bottom ledge systems with clear depth changes, often with scattered rock. Channel edges and hump shoulders.
Birds are working these areas in the reports. Baitfish stack on the structure and bass feed aggressively here. The deeper ledges function as daytime sanctuaries and the shallower edges light up in early morning and evening. - McPherson Slough Channel Edges — 8 to 18 feet near the breaks, 20+ feet in the main channel · Creek channel with hard-bottom transitions and the channel swing where depth drops quickly. Rocky banks.
Creek channels funnel fall shad movements. Bass position on the edges to intercept baitfish. The depth change provides quick access to deep refuge and shallow feeding zones. Secondary points and ledges within the channel hold good numbers. - Rocky Bass Banks and Hard-Bottom Points — 8 to 16 feet, often shallow breaking to 20+ feet · Rocky shoreline, gravel and clay transitions, hard-bottom flats near deep water access
Grapevine's backbone. Fall shad hunt these shallow hard-bottom zones and bass move up to chase them in early morning and evening. The rock provides cover and forage habitat. Always worth running if the ledges slow.
What to throw
- White Slab Spoon — 2.5 to 3 in · white · 1/2 to 5/8 oz (All day, morning and evening peak)
Drop to bottom, jig with sharp lifts and falls, or drag along ledge slopes keeping bottom contact. Vary cadence from aggressive snaps to slow shakes based on how aggressively they're feeding. - Green-Pumpkin Slab Spoon — 2.5 to 3 in · green-pumpkin · 5/8 oz (Late afternoon and evening, near timber and rocky structure)
Jig with snaps and shakes near timber edges and rocky banks. Can be dragged along bottom or worked vertically depending on depth and cover. - 4-inch White Swimsuit Shad — 4 in · white · 1/4 oz jighead (pair with shad) (Morning through late afternoon, especially near timber and points)
Drag slowly along ledges and timber edges. Twitch near cover. Can shake the head on bottom or swim it with a steady pull through deeper water. Match the cadence to how the bass respond. - 4-inch Green-Pumpkin Swimsuit Shad — 4 in · green-pumpkin · 1/4 oz jighead (pair with shad) (Midday into evening, rocky structure and hard-bottom banks)
Twitch and shake near rocky banks and channel transitions. Can also drag along bottom in midday water. Use snappy rod twitches followed by pauses to trigger reaction strikes. - White-and-Chartreuse Slab Spoon — 2.5 to 3 in · white-and-chartreuse · 1/2 oz (Evening and dusk when light fades)
Work it with aggressive snaps in low light. Maintains visibility and adds flash without being unnatural. Use the same jigging motion as straight white.
How to work it
- Vertical Jigging on Ledges — Morning peak and midday when bass are stacked on structure. Also works well during the evening bite when they're feeding hard. · Ledge edges and hump shoulders in 12 to 24 feet
Drop the slab to the bottom directly below the boat or drift slightly. Lift the spoon 1 to 3 feet with a sharp snap, then let it fall on a controlled slack line. The fall is often when they strike. Repeat at different speeds based on aggression level. - Dragging Spoons Along Bottom — Morning through late afternoon when you want to cover ground and find active fish. · Channel swings, ledge transitions, secondary points in 10 to 20 feet
Cast or position the boat to drift across a ledge or hump edge. Keep the spoon on the bottom with steady tension, lifting every 3 to 5 feet to work it up and then let it settle back down. Maintain contact with structure. This covers water and lets bass see the bait moving. - Shaky-Head Shake on Bottom — When the bite softens in midday or after a front. Also effective at night on deadstick hold-overs. Much more subtle than jigging but often picks off picky fish. · Timber edges, rocky banks, deep channels where cover requires precision
Position the rod tip at or near the 9 o'clock position and vibrate the rod handle rapidly with small motions while maintaining bottom contact. The jighead and shad shake in place without moving far. Let pauses between shakes let the shad settle naturally.
Pro tips
- Watch for working birds all day. They pinpoint active white bass and shad schools, which means largemouth are nearby feeding too. Follow the bird action and you'll find the bite.
- Keep a second rod rigged with a 4-inch green-pumpkin shad on a 1/4-ounce jighead and ready to flip near timber or under docks. If the open-water spoon bite slows, casting into cover often picks off the better fish holding tight to wood.
- Pool is down 2.5 feet, which concentrates baitfish and bass into tighter corridors. Fish the channel edges and ledge transitions more aggressively than usual. Less real estate means denser populations and faster fishing.
If conditions change
If clearing skies develop, bass will drop deeper faster. Shift your focus to the 18 to 24-foot ledges and channel humps earlier in the day and stay deep longer. If wind picks up from the east, fish the windward banks and points first. Wind-blown water oxygenates and pushes baitfish. If a front moves through and the bite shuts down, downsize immediately to a shake-head with a 4-inch shad and slow your retrieve to nearly stationary. Fish the densest timber and rockiest banks. If water clarity muddies from runoff, go with 5/8-ounce white or chartreuse spoons and work them with aggressive jigging to create more vibration and lateral-line signal. Stay on the same structure but fish more vertically and tighter to cover.
Find more fish. A fresh guide report like this for covered lakes every day · free account